Color: Green Grade / Temperature Range F° (C°): Bulk -40(-40) 500(260) Gun Pak -40(-40) 500(260) Principle Services: General purpose sealant for liquid and gaseous aliphatic hydrocarbon service suitable for gasoline, kerosene, fuel oils, crude distillates, aviation and jet fuel, natural gas. Unsuitable for: Aromatic solvents, strong acids and alkalies, steam.   Read More

Color: Green Grade / Temperature Range F° (C°): -20(-29) 500(260) Principle Services: General purpose sealant for liquid and gaseous aliphatic hydrocarbon service suitable for gasoline, kerosene, fuel oils, crude distillates, aviation and jet fuel, natural gas. Unsuitable for: Aromatic solvents, strong acids and alkalies, steam.   Read More

Color: Green Principle Services: General purpose sealant for liquid and gaseous aliphatic hydrocarbon service suitable for gasoline, kerosene, fuel oils, crude distillates, aviation and jet fuel, natural gas. Unsuitable for: Aromatic solvents, strong acids and alkalies, steam.   Read More

Color: Black Grade / Temperature Range F° (C°): Bulk -30(-34.5) 700(371) Gun Pak -30(-34.5) 700(371) Principle Services: This sealant is recommended for elevated temperature services involving hot hydrocarbon gases & vapors, water, steam & aqueous solutions. Unsuitable for: Liquid light hydrocarbons, aromatic solvents & nitrating acids. It is not approved for food & pharmaceutical applications.   Read More

Principle Services: Nordstrom 1200, 1200LT, 1200HT Bulk Sealant  

Principle Services: Nordstrom HYSS High Temperature Super Soft Bulk Sealant

Color: White Grade / Temperature Range F° (C°): Bulk -50(-46) 80(26.7) Gun Pak 20(-6.7) 650(343) Principle Services: Air and gas dryer service, high temperature hot water. Hot oil, steam and hot oil/steam combinations on burner front application. Limit oxidizing services to 500 degrees F Unsuitable For: Hydrocarbon solvents   Read More

Color: Grey Grade/Temperature Range F° (C°) 50(10) 650(343) Principle Services: Air and gas dryer service, high temperature hot water. Hot oil, steam and hot oil/steam combinations on burner front application. Limit oxidizing services to 500  degrees F. Unsuitable For: Liquid light hydrocarbons, aromatic solvents, nitrating acids.   Read More

Color: Grey Grade/Temperature Range F° (C°) 20(-6.7) 650(343) Principle Services: Air and gas dryer service, high temperature hot water. Hot oil, steam and hot oil/steam combinations on burner front application. Limit oxidizing services to 500  degrees F. Unsuitable For: Liquid light hydrocarbons, aromatic solvents, nitrating acids.   Read More

Color: White Grade / Temperature Range F° (C°): Stick -40(-40) 400(240) Bulk -40(-40) 400(240) Gun Pak -40(-40) 400(240) Principle Services: A silicone sealant for hot air, hot water, steam, high vacuum, acetic acid, acetic anhydride, ethyl alcohol below 250°F, natural gas compressor discharge, food and pharmaceutical applications as determined by the user. Unsuitable for: Gasoline and light liquid hydrocarbons, strong mineral acids, aromatic and chlorinated solvents.   Read More

Color: Cream Grade / Temperature Range F° (C°): Stick -20(-29) 250(121) Bulk -40(-40) 250(121) Gun Pak -40(-40) 250(121) Principle Services: General gas and water sealant. Suitable for dry or wet gas, water works, and sewage services as determined suitable by the user. Unsuitable for: Organic solvents, strong chemicals.   Read More

The Flowserve Nordstrom 400A Hand Gun’s Powerful spring-loaded primer piston allows 30 or more strokes without re-priming. Positive action and light weight design makes the 400-A easy to handle and use. The Nordstrom 400A Hand Gun is ideal for size 6 and smaller valves and perfect for tight quarters and remote locations and under water service. The 400-A Hand Gun provides dependable performance under all conditions. Features Polished Hardened Steel Piston in High Pressure Barrel Powerful Spring-Loaded Primer Piston Allows 30 or More Strokes Without Repriming Bleeder Relief Valve Positive Action Makes the 400-A Easy to Handle and Use Uses Convenient J-Stick and K-Stick Sealants Includes 15,000 psi Gauge, Hose, Swivel, Giant Button Head Coupler. Ready to use out of the box.   Read More

Hand-operated 15,000 psi sealant injection. 20-pound bulk capacity. Features Powerful, Lightweight and Portable Hand-Operated 15,000 psi Sealant Injection Includes 15,000 psi Gauge 30-Pound Bulk Capacity and follower for 5-Quart Can Designed for Heavy Bulk Lubricants Easy to Use   Read More

The Flowserve Nordstrom 400-D Hand Gun is rated at 10,000 – 11,000 psi (690-759 bar) and includes many features for meeting the exact demands of replacing sealant in plug, ball and gate valves. Due to the “built-in” safety features, the 400-D Hand Gun provides maximum safety for both the user and the gun itself. The hydraulic system of the gun is equipped with an internal relief valve to protect the operator if pumping continues after the gun is depleted of sealant. A pressure gauge indicates the point at which sufficient sealant pressure has been developed within the valve. In designing the 400-D Hand Gun, engineers concentrated on greatly simplifying maintenance and repair procedures. In most cases, the gun can be easily maintained and repaired by valve service personnel, without requiring factory service. Features Versatile hand-held operation Ideal for use with size 6 Perfect for tight quarters or remote locations Rated at 10,000 to 11,000 psi (690-759 bar) Dependable performance under all conditions Large fluid capacity allows long intervals before recharging View Operation & Maintenance of Nordstrom 400D Handgun and Hypregun Video   Read More

Hydraulic Fluid for 400-D, Part # 71251 (1 pint can)

Color: Cream Grade/Temperature Range F° (C°): Stick 10(-12.2) 350(177) Bulk 0(-173) 300(149) Gun Pak 0(-173) 300(149) Principle Services: Acids, alkalies, alcohols, amines, asphalt, aqueous solutions, fats, glycerine, glycols, soap, water and steam. Food and pharmaceutical applications as determined by the user. Unsuitable for: Hydrocarbon solvents   Read More

Color: Brown Grade / Temperature Range F° (C°): Stick -10(-23) 500(260) Bulk -20(-29) 500(260) SS Bulk -10(-23 500(260) Gun Pak -20(-29) 500(260 Principle Services: General purpose sealant for aliphatic hydrocarbon liquids and gases including gasoline, kerosene, fuel and lubricating oils, crude distillates, sweet or sour natural and manufactured gas with water or organic condensates, LPG systems, dilute acids and alkalies, glycols, textile plants, aqueous solutions, and water. Unsuitable for: Aromatic solvents, strong chemicals, hot air.   Read More

Nordstrom 555SS Sealant

Color: Brown Grade / Temperature Range F° (C°): Bulk 0(-17.8) 500(260) Gun Pak 0(-17.8) 500(260) Principle Services: Solvent treating of lubricating oils, hot hydrocarbon vapors and gases, general hot oil service, asphalt. Unsuitable for: Liquid light hydrocarbons, aromatic solvents, strong acids and chemicals.   Read More

Color: Brown Grade / Temperature Range F° (C°): 50(10) 500(260) Principle Services: Solvent treating of lubricating oils, hot hydrocarbon vapors and gases, general hot oil service, asphalt. Unsuitable for: Liquid light hydrocarbons, aromatic solvents, strong acids and chemicals.   Read More

Principal Uses: Serck Audco Valves 731 Bulk & Stick Sealant

Principle Services: Serck Audco Valves 733LT Bulk & Stick Sealant

Serck Audco Valves 733 Bulk Sealant

Serck Audco Valves 733 Stick Sealant

Serck Audco Valves 733X Bulk & Stick Sealant

Principle Service: Serck Audco Valves 735 Bulk & Stick Sealant

Color: Pink Grade / Temperature Range F° (C°): Stick 30(-1.1) 300(149) Bulk 20(-6.7) 300(149) Gun Pak 20(-6.7) 300(149) Principle Services: Benzene, butane, solvent naphthas, toluene, gasoline containing benzene or large amounts of aromatic hydrocarbons, carbon bisulfide, carbon tetrachloride, animal and vegetable oils. Unsuitable for: Strong acids, nitrating acids, alcohols, aqueous solutions.   Read More

Color: Light Brown Grade / Temperature Range F° (C°): Bulk -85(-65) 250(121) Gun Pak -85(-65) 250(121) Principle Services: Natural gas transmission lines under variable extreme climatic temperatures. Air and inert gases at sub-zero temperatures. Unsuitable for: Liquid hydrocarbon solvents, strong chemicals.   Read More

Color: Light Brown Grade / Temperature Range F° (C°): -85(-65) 250(121) Principle Services: Natural gas transmission lines under variable extreme climatic temperatures. Air and inert gases at sub-zero temperatures. Unsuitable for: Liquid hydrocarbon solvents, strong chemicals.   Read More

Color: Black Grade / Temperature Range F° (C°): Stick (all sizes) -30(-34.5) Principle Services:Natural gas transmission lines under variable extreme climatic temperatures. Air and inert gases at sub-zero temperatures. Unsuitable for: Liquid hydrocarbon solvents, strong chemicals.   Read More

Color: Cream Grade / Temperature Range F° (C°): Bulk -10(-23) 350(177) Gun Pak -10(-23) 350(177) Principle Services: Excellent dual resistance to petroleum products and water. Particularly recommended for regular, premium and high octane gasoline, kerosene, aviation and jet fuels, fuel blending ingredients, such as alkylate and platformate, fuel and lubricating oils, mixtures of these products and water in all proportions. Usable to 400°F in non-oxidizing atmospheres. Approved under specification MIL-G-6032D “Grease Plug Valve, Gasoline and Oil Resistant” Unsuitable for: Strong acids and alkalies.   Read More

Color: Cream Grade / Temperature Range F° (C°): 10(-12.2) 350(177) Principle Services: Excellent dual resistance to petroleum products and water. Particularly recommended for regular, premium and high octane gasoline, kerosene, aviation and jet fuels, fuel blending ingredients, such as alkylate and platformate, fuel and lubricating oils, mixtures of these products and water in all proportions. Usable to 400°F in non-oxidizing atmospheres. Approved under specification MIL-G-6032D “Grease Plug Valve, Gasoline and Oil Resistant” Unsuitable for: Strong acids and alkalies.   Read More

Color: Cream Grade / Temperature Range F° (C°): -10(-23) 350(177) Principle Services: Excellent dual resistance to petroleum products and water. Particularly recommended for regular, premium and high octane gasoline, kerosene, aviation and jet fuels, fuel blending ingredients, such as alkylate and platformate, fuel and lubricating oils, mixtures of these products and water in all proportions. Usable to 400°F in non-oxidizing atmospheres. Approved under specification MIL-G-6032D "Grease Plug Valve, Gasoline and Oil Resistant" Unsuitable for: Strong acids and alkalies.   Read More

Color: Cream Grade / Temperature Range F° (C°): Bulk -50(-46) 300(149) Gun Pak -50(-46) 300(149) Principle Services: Aliphatic liquids and gases including gasolines, kerosene, fuel and lubricating oils, hydrocarbon solvents and natural gas, neutral brines and salt solutions. Unsuitable for: Strong acids and alkalies aromatic and chlorinated solvents.   Read More

Used to bleed pressure from valve bodies, floating ball check. For Service to 10,000 PSI

Combination Lubricant/Stick Injector Grease Fittings accept button head grease gun couplers for injecting grease or stick lubricants. They are offered in double ball and single ball styles for service to 10,000 psi.   Read More

Button Head Couplers, Safe Vent Couplers, Lube Adapters, Pressure Relief Tools, Leak Lock Fittings, etc.. If you do not see what you need here, please ask, we may have it.   Read More

Giant Button Head Grease Fitting Assemblies are used for injecting lubricants into applications calling for re-lubrication maintenance. They are offered in double ball and single ball styles for service to 10,000 psi.   Read More

High Pressure Grease Fittings featuring Blowdown, Lubricant (Sealant), and Packing Injection Fitting Styles with 9/16" Autoclave style threads for 20,000 psi service. Also offered in a Blowdown Fitting Style with 1/2” NPT for 10,000 psi service.   Read More

The Flowserve Nordstrom Hypregun-Plus 5G was developed using the original Nordstrom Hypregun design and modifications as suggested by many Hypregun owners. This design continues to meet field and plant maintenance needs of valve users. The Flowserve Nordstrom Hypregun-Plus 5G is ideal for large-scale valve servicing in refineries, compressor stations, gasoline plants, pipelines and manifold installations. Features Compact and Efficient Design, Shipping Weight is 96-lbs. Air Operated Sealant Injection of 10,000 PSI Capacity Versatile Design for Servicing Small or Large Valves Motor Operates at 100:1 Pressure on 100 to 125 psi (7-8.6 bar) Air, Motor Uses A Maximum of 11.4 cubic feet of air per minute when operated at 125 PSI (8.6 bar) Ten Foot Hose is Easily Extended Into Tight Space Both the five-quart and five-gallon (4.7 and 18.9 liter) Hypreguns work for all size valves. Ideal for Refineries, Compressor Stations, Pipelines and Manifold; ideal for large scale valve servicing in refineries, compressor stations, gasoline plants, cycling plants, pipelines, and manifold installations. Versatile design for servicing small or large valves Compact, highly efficient, air operated sealant injection devices with a 100:1 pressure ratio and double acting piston. Continued positive pressure applied to the side cylinders assures intimate contact between the follower plate and sealant makes it possible to pump sealant at much lower temperatures. The follower plate is engineered to promote flow of sealant to the foot valve at all workable air pressures but air pressure between 100 and 125 psi (6.9 to 8.6 bar) provide the most efficient operation. The air motor is rated to 125 psi (8.6 bar) and the Hypreguns should NOT be operated with pressures exceeding this rating. The air motor uses a maximum of 11.4 cubic feet of air per minute when operated at 125 psi (8.6 bar) with zero load. Reduced air pressure and increased load reduce air consumption although not linearly. Moisture traps (not supplied with the guns) can be used to prevent moisture from reaching the air motor which can condense and freeze causing the air motor to stall. Sealant cans have been materially strengthened with welded seams and are standard for all Nordstrom bulk sealants. The can shield supplied with each gun gives added strength to the can and should be used at all times. The sealant cans and can shields have been developed specifically for use with Nordstrom Hypregun-Plus devices and it is not recommended using containers of sealants developed by other manufacturers. The Hypregun-Plus 5Q uses 5 quart (4.7 litre) sealant cans. The Hypregun-Plus 5G uses 5 gallon (8.9 litre) sealant cans. Both guns work well for all size valves. Refer to NVENIM003 for Hypregun 5G and NVENIM004 for Hypregun Plus 5G for further Assembly, Operation and Maintenance Instructions.   Read More

The Flowserve Nordstrom Hypregun-Plus 5Q was developed using the original Nordstrom Hypregun design and modifications as suggested by many Hypregun owners. This design continues to meet field and plant maintenance needs of valve users. The Flowserve Nordstrom Hypregun-Plus 5Q is ideal for large-scale valve servicing in refineries, compressor stations, gasoline plants, pipelines and manifold installations. Features Compact and Efficient Design, Shipping Weight is 63-lbs. Air Operated Sealant Injection of 10,000 PSI Capacity Versatile Design for Servicing Small or Large Valves Motor Operates at 100:1 Pressure on 100 to 125 psi (7-8.6 bar) Air, Motor Uses A Maximum of 11.4 cubic feet of air per minute when operated at 125 PSI (8.6 bar) Ten Foot Hose is Easily Extended Into Tight Space Both the five-quart and five-gallon (4.7 and 18.9 liter) Hypreguns work for all size valves. Ideal for Refineries, Compressor Stations, Pipelines and Manifold; ideal for large scale valve servicing in refineries, compressor stations, gasoline plants, cycling plants, pipelines, and manifold installations. Versatile design for servicing small or large valves Compact, highly efficient, air operated sealant injection devices with a 100:1 pressure ratio and double acting piston. Continued positive pressure applied to the side cylinders assures intimate contact between the follower plate and sealant makes it possible to pump sealant at much lower temperatures. The follower plate is engineered to promote flow of sealant to the foot valve at all workable air pressures but air pressure between 100 and 125 psi (6.9 to 8.6 bar) provide the most efficient operation. The air motor is rated to 125 psi (8.6 bar) and the Hypreguns should NOT be operated with pressures exceeding this rating. The air motor uses a maximum of 11.4 cubic feet of air per minute when operated at 125 psi (8.6 bar) with zero load. Reduced air pressure and increased load reduce air consumption although not linearly. Moisture traps (not supplied with the guns) can be used to prevent moisture from reaching the air motor which can condense and freeze causing the air motor to stall. Sealant cans have been materially strengthened with welded seams and are standard for all Nordstrom bulk sealants. The can shield supplied with each gun gives added strength to the can and should be used at all times. The sealant cans and can shields have been developed specifically for use with Nordstrom Hypregun-Plus devices and it is not recommended using containers of sealants developed by other manufacturers. The Hypregun-Plus 5Q uses 5 quart (4.7 litre) sealant cans. The Hypregun-Plus 5G uses 5 gallon (8.9 litre) sealant cans. Both guns work well for all size valves. Refer to NVENIM003 for Hypregun 5Q and NVENIM004 for Hypregun Plus 5G for further Assembly, Operation and Maintenance Instructions.   Read More

Internal Check Grease Fittings are available in single and double ball designs with tapered or straight threads for service to 10,000 psi.   Read More

Lock Seal Grease Fittings feature a two piece metal-to-metal seal with a floating cone to prevent galling of the seat. These fittings accept button head grease gun couplers and are offered in a double ball style for service to 10,000 psi.   Read More

McEvoy® Style Compound and Grease Fittings are specifically designed for use with McEvoy® gate valves.

Packing / Bonnet Injection Grease Fittings are used in service to 10,000 psi for injecting fibrous and plastic packing into the stem area.   Read More

For 1″ – 14 UNS Vented Cap Fittings 1/2″ NPT Vent Port Pressure Relief Tools connect to fittings to allow body cavity pressure to be vented to atmosphere.   Read More

Used on packing injectors having 1/2-20UNF I.D. threads to hold ball check off seat to relieve internal pressure.    Read More

For 1″ – 14 UNS Vented Cap Fittings

1″-14 w/body vent, w/o-ring, 1/2″ NPT pipe-plug, swivel base to relieve internal pressure (pressure retaining style)

Vented Cap Body Grease Fittings are offered with and without Giant button Head connectors for service to 10,000 psi.